Its C series jaw crusher is quarrying, mining, gravel pit, and even recycling such ideal ground fixed crushing equipment. They are easy to install, powerful performance, high productivity, and can be applied to existing equipment renewal or new crushing crushing station.
Because of its C series jaw crusher for the overall space is small, so is an ideal choice to replace the existing pendulum and pendulum jaw crusher. Compared with the old crusher, the base load is smaller, so almost without modifying the existing foundation. The old pendulum jaw and pendulum with its C series jaw crusher the replacement of the same specifications of the crusher, improve the output of crusher, crushing particle size larger, more fine crushing products.
1 before the crusher stops, the unstable ore at the exit after the heavy plate feeder stops is cleaned up in case of falling off during construction.
2 the crusher stops after breaking the mine and cleans the slag around the lifting hole of the wedge, the wedge fixed bolt and the jaw plate with the cleaning apparatus.
3 use crane and jaw lifting tools to lift the upper jaw.
4 loosen the locking bolts of the upper wedge and the middle wedge respectively, remove the upper wedge lock bolt and the upper wedge, and then use the crane to lift the upper jaw plate to the ground.
5 Crane and jaw lifting tools are used to hoist the lower jaw.
6 loosen the locking bolts of the middle wedge and the lower wedge, remove the locking bolt and the middle wedge, and then use the crane to lift the jaw plate to the ground.
7 check the use of upper, middle and lower wedges and their fixed bolts, if there is a large deformation, cracks or damage should be replaced.
Post time: May-19-2022