The jaw crusher requires very high wear resistance, and the material is generally made of high wear resistant manganese steel lining plate. When the High wear resistant manganese steel lining plate, inside its crushing chamber two jaw plates (manganese steel), a jaw plate is fixed (also called a fixed jaw), it is slightly above the end the outward side inclined) fixed on the crusher cavity on the front wall, the other is a jaw plate activity we called back and forth (jaw) also called jaw tongue position tilt, which formed a crushing cavity of a small ladder large and fixed jaw plate (cavity).
Advantages of jaw crusher: simple structure, low manufacturing cost, convenient maintenance, reliable operation, small machine height, easy configuration, and difficult to block ore with high water content and high viscosity. Disadvantages: low productivity, large power consumption, large vibration, small crushing ratio, inhomogeneous product size, and can not be filled with ore feed.
1. Fixed tooth plate with skew wedge positioning
2, most effective meshing angle, efficient geometry
3, the hydraulic adjusting wedge can adjust the discharge port quickly when the product needs to be updated or when the worn tooth plate is replaced
4. Advanced side guard plate bolt system is easy to maintain
5, heat treated forging eccentric shaft
6,Centering roller bearing
7, Rack for stress relief by welding
8, the frame of the bolt joint
9, Machined tooth plate assembly contact surface
10, the gear plate can be installed with 180 degrees.
11, cushion or hydraulic wedge adjustment
Post time: Jul-22-2022